TOPIC HUB · 4 guides
CNC controls, axes and backgauge systems
How control platforms, axis packages and backgauge configurations change what a press brake can produce, and how to specify them.
What this topic covers
These guides are editorial selection references. Tables, worked examples and troubleshooting lists describe methods, not GWMT machine ratings, availability or certified performance.
Published guides in this topic
Anschlag an der Abkantpresse: Typen, Achsen, Kalibrierung und Fehlersuche
The back gauge decides where every bend line lands on the sheet. This guide covers the mechanical construction of a back gauge, the manual, NC, CNC and servo types, what the X, R, Z, X1-X2 and R1-R2 axes each control, positioning accuracy and repeatability figures, a step-by-step calibration method, a fault troubleshooting table, a maintenance schedule by frequency, and how to choose a configuration for different production work.
3, 4 oder 6 Achsen passend zu Ihren Werkstücken auswählen
Schauen Sie über die Achsenzahl hinaus: Eichposition, Biegefolge und Setup-Frequenz bestimmen, welche Bewegungen kontrolliert werden müssen.
Typen von CNC-Steuerungen: Bewegungsart, Regelkreis und Achszahl
The CNC control system is the brain of a press brake and directly determines bending accuracy, repeatability and efficiency. This guide explains the five core components of a CNC control system, classifies systems by motion type, control loop and axis count, sets out what Y1/Y2, X, R, Z1/Z2 and crowning compensation each do on a press brake, explains why closed-loop control is close to mandatory for bending, and gives a question order for specification along with a type comparison table.
Delem, Cybelec und ESA: Arbeitsabläufe vergleichen
Vergleichen Sie Programmierung, Achsensteuerung, Werkzeugverwaltung und Datenübertragung mit einem repräsentativen Teil, nicht mit dem Logo allein.
Related equipment and solutions
Machine configuration follows an application review. These pages describe the equipment and control options behind the selection methods above.
Discuss this topic with an engineer
Share the part drawing, material grade, thickness range and target output. GWMT will review the configuration against your application.